The vertical multistage centrifugal pump is a centrifugal pump with compact overall structure, small size, light weight, low noise, remarkable energy saving effect and convenient maintenance. It adopts standard vertical motor and quick-install mechanical seal, which is very convenient to replace.

The vertical multistage centrifugal pump manufacturer tells you that when the motor drives the impeller on the shaft to rotate at high speed, the liquid filled in the impeller will be thrown from the center of the impeller to the periphery of the impeller along the flow path between the blades under the action of centrifugal force. The effect of the pressure and speed increases at the same time, and is led to the next-stage impeller through the flow channel of the guide casing. This is the principle, and it flows through all the impellers and guide casings one by one, further increasing the pressure energy of the liquid. After each impeller is stacked step by step, a certain head is obtained.
Application of vertical multistage centrifugal pump:
1. The main pump of frequency conversion water supply system.
2. Ordinary water supply, boiler water supply.
3. For high pressure washing, R/O filter device.
4. Cold and hot water circulation.
5. Manufacturing engineering equipment, beverage processing equipment.
The above is the application related introduction of vertical multistage centrifugal pump. If you have other questions, you can pay attention to our company.