咨询热线:4008081399
Installation steps of vertical multistage centrifugal pump
- Time of issue:2022-06-28
- Views:0
Installation steps of vertical multistage centrifugal pump
- Categories:vertical multistage centrifugal pump
- Author:
- Origin:
- Time of issue:2022-06-28
- Views:0
Vertical multistage centrifugal pump is a centrifugal pump with compact overall structure, small volume, light weight, low noise, remarkable energy saving effect and convenient maintenance. With standard vertical motor and quick-fit mechanical seal, replacement is very convenient. The following will take you to understand its installation steps.
Vertical multistage centrifugal pump installation steps:
1. Check the integrity of the water pump and motor before installation.
2. The installation position of the pump should be as close to the water source as possible.
3. There are two ways to install the pump and the base, one is a rigid connection directly installed on the cement foundation, and the other is a flexible connection installed with a shock absorber.
4. For direct installation, the pump can be placed on the foundation with a height of 30-40 mm (prepare to be filled with cement slurry). Then make corrections, put on the anchor bolts, and fill with cement mortar. After 3 to 5 days of cement drying. Re-calibrate, and after the cement is completely dry, tighten the nuts of the anchor bolts.
5. When installing the pipeline, the multi-stage vertical centrifugal pump and the water outlet pipeline should have their own supports, and the flange of the pump should not bear excessive pipeline weight.
6. When the pump is used in the occasion with suction, the end of the water inlet pipe should be equipped with a bottom valve and the inlet and outlet pipes should not have too many bends. At the same time, there should be no water leakage. Air leakage exists.
7. The vertical multistage centrifugal pump manufacturer tells you that it is best to install a filter screen on the inlet pipeline to prevent impurities from entering the interior of the impeller. The effective area of the filter screen should be 3 to 4 times the area of the inlet pipe to ensure the free flow of the liquid.
8. For the convenience and safety of maintenance and use, install a regulating valve on each of the inlet and outlet pipelines of the pump and a pressure gauge near the pump outlet to ensure that the pump operates within the rated range and ensures the normal operation and service life of the pump. .
9. If you need to expand the diameter of the mouth, please use the eccentric reducer connector.
After the vertical multistage centrifugal pump product is put on the market, it has the characteristics of high efficiency and energy saving, reliable quality and wide range of use.
Related News

Copyright © minapump.com All Rights Reserved 粤ICP备10038864号-4 Power by:www.300.cn